Search results for "Light-emitting diode"
showing 10 items of 111 documents
Rock-salt CdZnO as a transparent conductive oxide
2018
Transparent conducting oxides (TCOs) are widely used in applications from solar cells to light emitting diodes. Here, we show that the metal organic chemical vapor deposition (MOCVD)-grown, rock-salt CdZnO ternary, has excellent potential as a TCO. To assess this compound, we use a combination of infrared reflectance and ultraviolet-visible absorption spectroscopies, together with Hall effect, to determine its optical and electrical transport characteristics. It is found that the incorporation of Zn produces an increment of the electron concentration and mobility, yielding lower resistivities than those of CdO, with a minimum of 1.96 × 10 − 4 Ω · cm for a Zn content of 10%. Moreover, due to…
Current Spreading Length and Injection Efficiency in ZnO/GaN-Based Light-Emitting Diodes
2019
We report on carrier injection features in light-emitting diodes (LEDs) based on nonintentionally doped-ZnO/p-GaN heterostructures. These LEDs consist of a ZnO layer grown by chemical-bath deposition (CBD) onto a p-GaN template without using any seed layer. The ZnO layer (~1- $\mu \text{m}$ thickness) consists of a dense collection of partially coalesced ZnO nanorods, organized in wurtzite phase with marked vertical orientation, whose density depends on the concentration of the solution during the CBD process. Due to the limited conductivity of the p-GaN layer, the recombination in the n-region is strongly dependent on the spreading length of the holes, ${L}_{h}$ , coming from the p-contact…
Hybrid perovskites for light-emitting and photovoltaic devices
2017
El objetivo de esta tesis es el desarrollo de métodos y materiales apropiados para la preparación de capas delgadas de perovskitas híbridas, y su implementación en dispositivos optoelectrónicos. Se dedicará particular atención a las relaciones entre la naturaleza del material, el método de deposición y las propiedades optoelectrónicas. El trabajo está organizado como sigue: - Células solares de perovskitas preparadas por evaporación flash. Se desarrolla un simple método de evaporación por la preparación de células solares. - Dispositivos de perovskita con alta eficiencia fotovoltaica y electroluminiscente. En este capítulo se presentan dispositivos optoelectrónicos de perovskitas preparados…
Light scattering in artificial fog and simulated with light scattering filter.
2009
Disability glare, affecting e.g. road safety at night, may result either from intraocular light scattering or from external conditions such as fog. Measurements were made of light scattering in fog and compared with intraocular straylight data for normal eyes and eyes with simulated cataract. All measurements were made with a direct compensation flicker method. To estimate light scattering levels in fog, straylight measurements were carried in a fog chamber for different densities of fog. Density was characterized by the meteorological term visibility V and ranged from 7 to 25. Test distance for measurements in the fog was constant at 5 m. Cataract eye conditions were simulated by placing a…
Soret emission from water-soluble porphyrin thin films: effect on the electroluminescence response
2009
The emission properties of TSPP [tetrakis(4-sulfonatophenyl) porphyrin] and TMPyP [tetrakis(4-methylpyridyl) porphyrin] in thin films, prepared both by the Langmuir–Blodgett technique and the spin-coating method, have been investigated. Surprisingly, in most of the samples analyzed, the emission spectra do not show the usual two bands typical of porphyrins (in the region 650–750 nm), and depend strongly on the excitation energy. The origin of a new emission band detected at ∼480–500 nm is discussed in terms of the nature of the porphyrin aggregates. Moreover, we demonstrate that the presence or absence of this band in the fluorescence spectrum is directly related to the generation of electr…
Air stable hybrid organic-inorganic light emitting diodes using ZnO as the cathode
2007
An air stable hybrid organic-inorganic light emitting device is presented. This architecture makes use of metal oxides as charge injecting materials into the light emitting polymer, avoiding the use of air sensitive cathodes commonly employed in organic light emitting diode manufacturing. We report the application of zinc oxide as a cathode in an organic light emitting device. This electroluminescent device shows high brightness levels reaching 6500 cd/m2 at voltages as low as 8 V. Compared to a conventional device using low workfunction metal cathodes, our device shows a lower turn-on voltage and it can operate in air.
Photoluminescence quantum yield exceeding 80% in low dimensional perovskite thin-films via passivation control
2017
Quasi-2D perovskites with the BA : MA molar ratio equal to 3 : 3 show a remarkable PLQY exceeding 80%, thanks to the use of an electron donor as the passivating agent. These films have been applied in LEDs that exhibit high brightness exceeding 1000 cd m−2 and current efficiencies >3 cd A−1.
Multispectral and autofluorescence RGB imaging for skin cancer diagnostics
2019
This paper presents the results of statistical clinical data, combining two diagnostic methods. A combination of two skin imaging methods – diffuse reflectance and autofluorescence – has been applied for skin cancer diagnostics. Autofluorescence (AF) and multispectral diffuse reflectance images were acquired by custom made prototype with 405 nm, 526 nm, 663 nm and 964 nm LEDs and RGB CMOS camera. Parameter p’ was calculated from diffuse reflectance images under green, red and infrared illumination, AF intensity (I’) was calculated from AF images exited at 405nm wavelength. Obtained results show that criterion p` > 1 gives possibility to discriminate melanomas and different kind of keratosis…
RGB imaging system for monitoring of skin vascular malformation's laser therapy
2012
A prototype RGB imaging system for mapping of skin chromophores consists of a commercial RGB CMOS sensor, RGB LEDs ring-light illuminator and orthogonally orientated polarizers for reducing specular reflectance. The system was used for monitoring of vascular malformations (hemagiomas and telangiectasias) therapy.
Subphthalocyanines as narrow band red-light emitting materials
2007
A series of new light emitting subphthalocyanines, lower homologues of phthalocyanines, were synthesized having color points covering the red-orange region of the visible spectrum. Additionally, they were found to be of potential use as narrow band emitters for red-light emitting diodes.